Electronic Testimonials Lii-500/lii402/lii-202/lii-100/1.2v/3.7v Battery Charger Plug 18650/26650/18350/16340/18500/aa/aaa Liitokala 5v Lithium 2a Icey Nikole Rating: 4.1 out of 5
Inexpensive cost and also cost-free delivery. Allow's buy Electronic Testimonials Lii-500/lii402/lii-202/lii-100/1.2v/3.7v Battery Charger Plug 18650/26650/18350/16340/18500/aa/aaa Liitokala 5v Lithium 2a prior to costs climb.
Note: Please carefully check the product details, select the package you need. Please note the purchase of the plug you need, if there is no comment or leave a message, we will send the default EU round plugs.Thank you for your cooperation Lii-402 List:1, Liitokala Lii402 whole packageLii402 charger 1PCS USB cable 1PCS5V 2A charging plug 1PCSmanual 1PCS2, Liitokala Lii402 USB package: Lii402 charger 1PCSUSB cable 1PCSmanual 1PCS( Note: This package does not include a plug! )Lii-402 Charger ManualA warning1. This charger can only charge cylindrical lithium ion battery (3.7V, 3.8V), nickel hydrogen / nickel cadmium, lithium iron phosphate battery;2. Before use, please carefully refer to the instructions, pay attention to the recommended rechargeable battery charging current, do not exceed the recommended current charge;3. Charge with a 5V USB adapter (adapter current recommended 2A);4. Charger charge and discharge may be fever, be careful not to burn;5. When you stop using it, unplug the power and unplug the battery.6. Can only be used in normal room.7. This product test data is for reference only, the actual situation, please refer to professional equipment.Second, the charger requirements and functions:1. Micro USB DC 5V input, two separate charging and microcomputer management system2. Available for 4 kinds of charging current selection (500mA / 700mA / 1000mA / 2000mA) 2000mA designated fourth slot.3. LED display Charge status 25% 50% 75% 100% and battery type NiMH 1.2V Li-Fe 3.2V Li-ion 3.7V Li-ion 3.85V.4. Can automatically identify lithium (Li-ion) batteries and nickel-metal hydride (Ni-MH) batteries, manually select the iron phosphate (Liepo4) battery and Li-ion 3.85V battery5. 0V voltage activation function, 1.65-1.85V can not be charged (but there will be activated current trickle type charge).6. Have over-charge, short circuit, intelligent identification of bad batteries and reverse battery detection protection.7. Charging mode, constant current constant pressure8. Using DC input, the charger power supply for the 5V-2A (Micro plug)9. With standard 5V / 1000mA USB automatic identification output function,Third, the key, LED and function description1. Press the key: hold the selector key for 2 seconds to switch 500mA 700mA 1000mA 2000mA charge current at power on,When charging the battery, press the select key to change the type of rechargeable battery. When the rechargeable battery type is selected (for example, 3.20V 3.85V) for 5 seconds, enter the charging state.2. LED: charger connected to the 5V power supply, the charger all the LED moment all bright, if the battery is not put into the charging slot, 500mA (LED) indicator light is on, the other lights go out.When the battery is detected, the four LED lights are all bright, 3.7LED light will flash, then press the button to select the type of battery you need to charge, if not selected, 5 seconds into the default identification of the battery charge, charge The indicator light flashes at the corresponding charge ratio. Press the button to check the charge type (no power indication) 5 seconds after the return to the state of charge. When not energized, insert the battery to view the power ratio (5 seconds after extinguishing, need to view again press)USB output indication: When the USB output is detected, the power indicator turns on for 10 seconds and presses to check the power.4. LED display reference pictureFourth, the electrical technical parameters: 1, input power: Micro USB DC 5V / 2A2, the output voltage: 1.42V4.2V ± 0.05V,3.65 ± 0.05V4.35 ± 0.05V3, the output current: 2000mA * 1 1000mA * 2 700mA * 3 500mA * 44, constant voltage charging, cut-off current: <100m A;5, external power supply standby current: <15.0m A;Five, USB output function:1, USB port output no-load voltage: 4.90-5.30V; specify the fourth slot for the USB output2, the output current: 1000 m A;3, no-load current: <1m A;4, load 1000m A current, the port output voltage: 4.75-5.25V;5, stop output protection voltage: 3.0 ± 0.1V;6, compatible batteries: Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440Seven, charger size: 112mm × 90mm × 30mm (length / width / height) Weight: 173g (+ micro line) Lii-100 List:1, Liitokala Lii100 package:Lii100 charger 1PCSUSB cable 1PCS5V 2A charging plug1PCSmanual 1PCSShipping list: Liitokala lii-100 charger 1PCSLiitokala USB cable1PCS
Liitokala packing bag 1PCS
Liitokala lii-100 Manual 1PCS
Lii-100 Charger Product description:Firstly, the charger requirements and functions:1. Using micro USB DC 5V input, a single loading slot and microcomputers management system Independent 2. Available two types of charging current selection (500mA / 1000mA)3. LED displays the charge status 25% 50% 75% 100% and NiMH battery 1.2V Li-FE 3.0 V Li-ion 3.7V Li-ion 3.85 V.4. It can automatically identify the lithium battery (Li-ion) and nickel-metal hydride batteries (Ni-MH) battery, Selection iron phosphate treatment manual (Liepo4) batteries and Li-Ion 3.85 V battery 5. There are 0 V activation voltage, 1.6-2.2 V does not charge (but donations will be activated current standard charge flow). 6. Do not overload and over discharge, short circuit, intelligent recognition detection Bad battery and reverse battery protection. (Note: short circuit, bad battery, battery reversal, charger does not work, LED is not lit)7. Load mode, constant current constant voltage 8. Using a DC input power to the charger for V-1A work (Micro connector) 9. A paragraph: with standard 5 V / 1000 ma USB output automatic identification,B paragraph: No USB output functionSecondly, a description of keys, LEDs and function1. Press: under power, any time hold the Select button for 2 seconds each 500mA converter 1000mA load current;Battery-charging touch Select button to change the type of rechargeable battery, the battery needs to be charged when the selected type (eg 3 V 3.85 V) 5/2 to enter the state of charge.2. LED: charger plugged in the 5 v power supply, charger, all LED full brightness instantly, Without a battery in the charging slot, 500mA (LED) indicator light, other lights go out.Upon detection of a battery, four LED lights flashing, then you can tap the button to select the desired type of rechargeable batteries, if you do not choose, recognizing five seconds after entering the standard battery charging, charging indicator according to the corresponding power ratio flashes. Tap the button to consult the standard charge (no charge indicator) Five seconds after the return to the charging status. When not energized, insert the battery can be seen (5/2 and then turns off, you need to see the press again)USB output: when detected USB output, power indicator lights go off after 10 seconds, the button can see energy.Thirdly, the electric technical parameters:1, input power: USB Micro DC 5 v / 1a2, the output voltage: 4.2 V ± 1% / 5V3, the output current: 500mA / 1000mA4, the constant voltage charging, current off: <100 one F;5, the source of standby current external power: <15.0mA;Four USB output function:1, USB port output load voltage: 4.90 to 5.30 v;2, the output current: 1000mA3 without current load: <1ma;4, 1000 m load current, the gate of the output voltage: 4.75 to 5.25 V;5, stop voltage protection Output: 3.0 ± 0.1 v;V. compatible battery:Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440Charger dimensions: 113 mm × 38 mm × 32 mm (length / width / height)Weight: ** g (without battery, power cord) Lii-202 List:1, Liitokala Lii202 package: Lii202 charger + USB cable + 5V 2A charging plug + manual Shipping list:Liitokala lii-202 charger 1PCSLiitokala USB cable1PCS
Liitokala packing bag 1PCS
Liitokala lii-202 Manual 1PCS
warming:
this charge is only for charging the cylindrical lithium-ion (3.7, 3.8), Ni-Mh / Ni-Cd, LiFePO4 (Li-Ion) batteries.Please read these instructions before use; pay attention to the recommended charging current, never choose the wrong charging currentwhen the charge with 5V USB AC adapter, 2A-current AC adapter recommendedCharger ma hot during operation for a long time, handle with care!please cut off the electricity and remove the battery from the charger when charging is complete.indoor condition only !!data mapping Charger for reference only; please refer to professional instrumentation, if you need accurate data 2. Features and Specifications: Micro USB DC 5V input, two independent slots and charging channels with built-in micro-computer control system to ensure high efficiencyTwo charging current parameters (0.5A / 1.0A)Four LED indicators show the charging status (25%, 50%, 75%, 100%), and also shows the battery type, if inserted into the battery (1.2 V Ni-Mh, 3.2 in Li-Fe, 3.7 in Li-Ion, 3.85 in li-ion)automatically identify Li-Ion and Ni-Mh; But, you need to adjust the charging mode for LiFePO4 and 3.85 in the lithium-ion batteryit can actively 0 V battery, but the device does not charge a 1.65 V ~ 1.85 V batteries types.built with excessive charging protection, over-discharge protection and protection of polar reverse. besides, it can detect a broken battery.Charing mode: instantaneous current and voltage.PERMANENT charging current: Operating voltage in the 5V-2A (Micro-connector)Standard automatic 5 V / 1000 mAh USB output port 3. Select the button, LED and function. MODE button:click to select the type of battery when inserting the battery. it will begin to charge the battery after fixing the battery type (please noted that it will automatically identify Li-Ion and Ni-Mh, no need to choose manually)press and hold for 2 seconds, when after connecting to power, it can be switched between charging current of 0.5A and 1.0A; Led indicatorconnect the charger to power, all LED indicators will be on when the battery is inserted after 5 seconds, the LED will be turned off except for the indicator 0.5A currentwhen the battery is inserted into the device, 4 LEDs will be turned on and 3.7 V LED indictors blink, then please press the MODE button to set the correct type of battery. it will begin to charge the battery after 5 seconds, and the LED indictors show the charging status.Press the MODE button to show the type of battery (5 seconds) during charging and return to show the charging statusit can show the remaining battery power, if you put the battery in the charger (with no connection to the power charging)USB output indicator: When the USB output is detected, the volume of the battery indicators will be on for 10 seconds and then off, press the button to show the battery volume speed. 4. Specification: Input: Micro USB DC 5V / 2AOutput: 1.4, 4.2V ± 05, 3.65 ± 05, 4.35 ± 05Output Current: 500/1000 mAhconstant voltage charging cut-off current: <100 mAhStandby Current: <15 mAh 5. USB output function USB output load voltage: 4.90 V-5.30Output Current: 1000 mAh (1A)Idle Current: <1 mAhthe output voltage of 4.75 V-5.25 V, when the current 1000 mAhoutput over-voltage protection: 3.0 ± 1 6. Compatibilityli-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 7. Size112 mm × 60 mm × 30 mm / 86 g + 15 g USB cableLiitokala lii-500 Charger
A warning
When using the USB cable, please mount 18650 battery or 26650 and do not connect the battery is the adapter. 1. This charger can only charge a cylindrical lithium-ion batteries and nickel-metal hydride batteries, non-rechargeable lithium iron phosphate battery; 2. Before use, please carefully refer to the instructions, pay attention to the recommendation of the rechargeable battery charging current, do not exceed the recommended charging current; 3. Do not use other power adapter; 4. Chargers discharge may be hot, be careful not to burn; 5. Stop use, unplug the power, removing the battery; 6. it can only be used in normal room. 7. This product test data for reference only, please refer professional equipment. Second, characteristics 1.4 kinds of charging current regulator (300mA / 500mA / 700mA / 1000mA); 2. Can different specifications (18650/26650 ...... / AA / AAA) in the battery charger; 3. The charger preclude the use of a separate screen LCD display, voltage (V) Current (mA) Time (h) Capacity (mAh) resistance (mR) parameters, E glance...; Under 4. CHARGE mode, 4 channel work independently, you can select different charging current for charging and Hunchong lithium-ion batteries and nickel-metal hydride batteries. Under 5. FAST TEST mode, 4 channels can quickly detect the battery capacity, regardless of the lithium-ion batteries and nickel-hydrogen batteries, are working independently. Rapid detection of battery capacity process (1 discharge, 2 full) by the two step 6. NOR TEST mode, the battery capacity is normally detected by the three step process (1 first charged, then discharged 2 and 3 refill), the detection process of the battery capacity; . 7.CHARGE and FAST TEST / NOR TEST 3 modes can work simultaneously; independent set charge / fast capacity detection / normal capacity detection; 8. A variety of protection functions: overcharge and over discharge, short circuit, temperature, 0V voltage activation function, (- ΔV & 0ΔV), 1.65V-2.2V can not be charged, intelligent recognition bad battery and reverse-battery detection protection. 9. with standard 5V / 1000 mA USB output: from 1 to 4 lithium batteries lithium batteries USB output is completed, the product can not be nickel-metal hydride battery with USB output. 10. with a dedicated power adapter: DC Input voltage: 12V / 2A. Third, the description of the keys 1. The charger has six buttons, mode selection key (MODE), the current selection key (CURREN), and view the data independently selected key (1234), the use of simple and convenient; 2. Hold down the MODE key in any case and held for 3 seconds to change the CHARGE (charge) mode or FAST TEST, NOR TEST (capacity test) mode, then tap again corresponding to the function keys can be changed within 8 seconds, to current, independent, Hunchong, capacity test, the selected function after 8 seconds into the working state, in working condition can tap the (1234) key to view the current (mA) / capacity (mAh) / voltage (V) / time ( h) / resistance (mR) data reference.Packing list: (Select according to your need)
1. lii500: Charger Liitokala lii-500 (battery not included) + 1 manual + 1 control number
2. lii500: Charger Liitokala lii-500 (battery not included) + power supply 12 V 1.5 A + 1 manual + 1 control number
3. lii500: Charger Liitokala lii-500 (battery not included) + power supply 12 V 1.5 A + 1 charger cable for car + 1 manual + 1 control number
Return Policy
If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service
On-time Delivery: If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).Electronic Testimonials Lii-500/lii402/lii-202/lii-100/1.2v/3.7v Battery Charger Plug 18650/26650/18350/16340/18500/aa/aaa Liitokala 5v Lithium 2a
No comments:
Post a Comment